|
|
|
|
|
#1
01-06-2009, 07:25 PM
|
||||
|
||||
|
Cruise control stalk
Hi,
i have a w124 300D 87/88 model. Does any one know the pin outs / wire color of the stalk control? Also are they simple momentary switches or are they interconnected with resistors, diodes etc? Any help appreciated
__________________
Peace and Blessings to you and yours Steve 1987 /88 300D 178K & Very tidy WVO RUG Diesel Blend OEM fuel heater thermostat by passed 1991 Nissan Patrol TD42 350k & very rough WVO RUG Blend return line to cav 296 filter 
|
|
#2
01-06-2009, 09:41 PM
|
||||
|
||||
|
From the switch to the connector above your left knee is as follows:
green with yellow stripe = +12V when on, no voltage when off blue = resume yellow = decelerate/set green = accelerate/set No diodes or resistors from the switch to the cruise amp connector in the diagram. I had the cruise amp solders reflowed only to discover a plastic socket in the linkage between the cruise actuator and IP had broken off. Sixto 87 300D
|
|
#3
01-06-2009, 09:56 PM
|
|||
|
|||
|
info here also. http://gdl-online.com/test024.html
__________________
Anything is possible if you don't know what you are talking about........ 1985 Mercedes 300D 2007 Mercedes C-350 1980 Mazda Rx-7 (SA22C) 2005 Jaguar XJR 2007 Jeep Wrangler
|
 |
| Bookmarks |
|
|
Linear Mode
