Looking for some reman or recycled calipers for my wagon's rear brakes (one is slightly leaky). Does anyone know if these are interchangeable with the sedan calipers, which happen to be much more plentiful?
I have a sedan, but I'd rather not have to pull them to check and then have to bleed the brakes, etc. They don't look like the same part on the Fastlane site, but don't know why they'd be different.
Thanks!

__________________

They use the same pads and should be interchangible but the wagon bore is slightly larger to provide additional braking. You can probably use sedan calipers without much diffenence noted but you will need to change both sides or it will pull slightly on braking.

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

Thanks for the info.
It was my plan to change out both to be on the safe side, and possibly the brake line, though it looks fine right now.
I wonder what the bore difference is, and whether I should just bite the bullet and pay for a full set of wagon rebuilts... I do have a tow hitch, and it would be nice to be on the safe side if I ever use it.

__________________

You can change the fronts to the vented 1981-1985 w126 disc/calipers and have better brakes also. They are plug and play.

they do indeed fit without trouble from a D to a TD... I was unaware of any differences. but like noted, apparently the bore is slightly larger for the TD's caliper.

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 560SL convertible
1987 190D 2.5-5SPEED!!!

1987 300TD
2005 Dodge Sprinter 2500 158"WB
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!

It actually is quite a bit larger than the sedan calipers and the front calipers. I didn't know they took the same pads though. I could swear they were bigger too, but I defer to somebody who is sure.......
O'Reilly has been a decent source for me. I have bought 4 rear wagon calipers and 2 front calipers from them.

__________________
Jimmy L.
'05 Acura TL 6MT
2001 ML430 My Spare

Gone:
'95 E300 188K "Batmobile" Texas Unfriendly Black
'85 300TD 235K "The Wagon" Texas Friendly White
'80 240D 154K "China" Scar engine installed
'81 300TD 240K "Smash"
'80 240D 230K "The Squash"
'81 240D 293K"Scar" Rear ended harder than Elton John