|
|
|
#1
|
||||
|
||||
"Lost" in the FSM
Can any body help me find my way to the (Mechanical)Vacuum Pump R+R instructions for 602/603 type engines?
Thanks, so very much!
__________________
'84 300SD sold 124.128 |
#2
|
|||
|
|||
I thought GSXR went through this. Here a link to his site:
http://www.w124performance.com/docs/mb/other I saw a few files that might relate. Or, Perhaps an advanced search with his name in Diesel Discussion? |
#3
|
|||
|
|||
Interesting.
It's not in the 603 engine manual. But, I found a reference for it in the R&R of the timer. Supposedly it's in section 43-610. I did find R & R of a vacuum pump in the 126 chassis manual under section 43-618, but it's for the 617 engine. The supplement at the rear of the book doesn't show anything for the 603. |
#4
|
||||
|
||||
Thank you
Thanks!
EDIT: I still cannot find the Vacuum pump R+R instructions...Making me crazier,I KNOW I've seen them,and I almost swear in a MB format.
__________________
'84 300SD sold 124.128 Last edited by compress ignite; 01-26-2009 at 02:20 AM. |
#5
|
||||
|
||||
43-0618 is referenced in the IP timer section but is not to be found in the 124 CD FSM. It's in the 126 CD FSM but it's a single pager with nothing of value -
Preliminary work: Remove visco-drive fan coupling V-belts ... remove (only on engine 603.961) Vacuum line [to brake booster] ... screw off, screw in, counterhold on threaded fitting Hex. head bolts ... screw out, screw in. Remove vacuum pump together with seal. Vacuum pump ... check for proper function Cripes, not even a torque spec! Sixto 87 300D |
#6
|
||||
|
||||
Thanks
Yeah,
I ain't touching that baby without Torque specs for re-installation! Look at what I found in the Instructions for testing vacuum pump on a 603: WTF kind of "Modifications" can be made "For Cost Reasons" that don't degrade the Durability/Longevity of the Pump?????? Are we now looking at a situation where a known "Good" used VP of the "Improved" version [Screws/Bolts in the face of the pump AND enclosed Bearing race] is a safer bet than a "Brand New" one from Mercedes or Pierburg (Same-Same)? 'Right out to the Recyclers Plundering for that 94 Volvo 850 with the ELECTRIC Vacuum Pump,I'll be going...
__________________
'84 300SD sold 124.128 |
#7
|
||||
|
||||
Agreed. My paper copy of the FSM "Service Manual, Diesel Engines 602, 603" refers to section 43-613 as Sixto says but that section is not in the manual.
Likewise, there is no discussion of vacuum pump R&R in the "Introduction into service" manuals, 1984 and 1985 (Engine 601 and W201 body– many features of the OM603 engine were first seen in the OM601) and 1986 (Engine 603 and W124 body). Very strange! Jeremy
__________________
"Buster" in the '95 Our all-Diesel family 1996 E300D (W210) . .338,000 miles Wife's car 2005 E320 CDI . . 113,000 miles My car Santa Rosa population 176,762 (2022) Total. . . . . . . . . . . . 627,762 "Oh lord won't you buy me a Mercedes Benz." -- Janis Joplin, October 1, 1970 |
#8
|
|||
|
|||
I thought this was about being lost in the Federated States of Micronesia.
|
Bookmarks |
|
|