Hey UtahPete I looked at the brush picture of the K44 on carbonbrush.com and it appears that the connection to the brush is brought out from the side of the brush. In Kerry's post he says that he needs to have the connection come out from the end of the brush. Did you progress far enough to determine if the K44
will work? I am also wondering what you or others are using for epoxy to hold the unit together after repair. I extend my thanks and good wishes for the holidays to you and to Kerry. Willie White

__________________
Willie White
1980 300SD 116
82 D engine and transmission
If something can go wrong--it will

I think I just used five minute epoxy gel that you can buy at the hardware store. Just about any epoxy would work I think.

__________________
1977 300d 70k--sold 08
1985 300TD 185k+
1984 307d 126k--sold 8/03
1985 409d 65k--sold 06
1984 300SD 315k--daughter's car
1979 300SD 122k--sold 2/11
1999 Fuso FG Expedition Camper
1993 GMC Sierra 6.5 TD 4x4
1982 Bluebird Wanderlodge CAT 3208--Sold 2/13