87 190D A/C issues

[bigblockchev]

My AC compressor does not kick in. Here is what I know, The fan is on high speed the temperature thumbwheel is set to max blue, there is R12 in the system, there is 60psi on the low side, the auxillary fan starts shortly after you jumper the compressor on, the compressor will start if you jumper it at the Kilma relay terminals 5-7 , The compressor speed sensor 144 produces at least .3V at terminals 9-11 as specd in the trouble shooting flowchart The microswitch 134/1 works , there is continuity between the terminals until the cam roller is engaged. The Klima relay tests good when I swap it into my wife's car, it is the same part #. As far as I can determine the compressor is not being told to start , so what else would inhibit it and exactly where on the car would those items be. My wiring diagrams off the PDF manual are very hard to read. I have a feeling that there are a couple of switches somewhere that are causing the compressor not to start. Anyone have any guidance. Thanks Dan