|
|
|
#1
|
|||
|
|||
autom button speed question
I have a 1984 300SD. When using the automatic "autom" button
for the climate control fan speed, it starts at speed 2 and works its way up to speed 5 and always stops at that higher speed. How do I get the blower to stop at one of the middle blower speed settings? Thanks Jeff |
#2
|
||||
|
||||
mine eventually slows down when the air temp in the car gets cooler (or warmer, depending...). It does take a little while sometimes and I get fed up with waiting for it to slow down, so I usually put it on low.
__________________
1985 300TD-euro 352,000 mi 1974 240D (1?)52,000 mi - has a new home now |
#3
|
|||
|
|||
The blower speed depends on the differential between the vehicle interior temperature and the setpoint.
If the setpoint is 20°C. and the interior of the vehicle is 30°C, it's going to sit on the #5 blower speed position for quite awhile until the temp. drops to 23°C or so.........then, and only then, will the blower speed begin to slow down. If the temperature never gets close to 20°C., the blower will never leave the #5 position. |
Bookmarks |
|
|