|
|
|
#1
|
||||
|
||||
upper oil pan gaskets?
I am swapping an engin from a CA 85 SD into a 83. I am needing to swap the upper oil pan.
What gaskets am I going to need for this? anyone have a few photo's? thanks
__________________
83 300SD Dark Silver Dark brown inside |
#2
|
|||
|
|||
no gaskets, rtv works or you can order the proper sealant from mb.
__________________
1986 300SDL, 211K,Dealership serviced its whole life 1991 190E 2.6(120k) 1983 300D(300k) 1977 300D(211k) |
#3
|
|||
|
|||
rtv as suggested
front crank seal rear main seal turbo drain tube .... ___ you are going to have an issue with drainage aren't you? The '85 cali only has one hole in the upper pan for oil drainage. |
#4
|
||||
|
||||
the one hole is the reason for changing the upper oil pan, then I will have both drains. Correct?
RTV, Front and rear main and the gasket for the drains. Is that it? I will get it ordered if that is all.
__________________
83 300SD Dark Silver Dark brown inside |
#5
|
|||
|
|||
and of course the gasket to the lower pan... that was given
maybe have some small sections of thin rubber around to wrap the tranny cooler hardlines when they go back into their brackets on the side of the pan. to the best of my knowledge, that is it.. .I just checked also since my car is on stands right now I understand now, I see your '85 parts car in the sig. |
Bookmarks |
|
|