|
|
|
#1
|
||||
|
||||
Boost pressure sensor
Took my intake off to find that my boost pressure sensor is not hooked up. This is the ellectrical plug on the top of thhe intake. Where should this be hooked up? I don't have my electrical FSM here with me but I would assume it has something to do with the switchover valve? Might be contributing to my loss of power and excessive smoking lately. I did a search, but searching boost, pressure, turbo, sensor, etc. doesn't get you too far on here....
__________________
TC Current stable: - 2004 Mazda RALLYWANKEL - 2007 Saturn sky redline - 2004 Explorer...under surgery. Past: 135i, GTI, 300E, 300SD, 300SD, Stealth |
#2
|
|||
|
|||
search:
pressure switch overboost protection there should be a line dangling around somewhere... and yes, it does lead to the solenoid eventually, but I believe it may travel through one of those hard plastic casings before it gets there. |
#3
|
|||
|
|||
ps.. it will not cause poor perf. unless it is grounding out on the chassis or another wire to Ground
|
Bookmarks |
|
|