Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-30-2009, 09:10 PM
Registered User
 
Join Date: Oct 2005
Posts: 50
Thumbs up

Thanks for the info!

Quote:
Originally Posted by Jeremy5848 View Post
Mercedes uses some sort of oil in the CV joints; most of the boot kits I have seen use grease. Rebuilding a CV joint is not something that I have heard to be a DIY job although just replacing the boot has been well documented here (use the search function).
This oil, is it available and affordable from the Mercedes dealers? Is there an OEM part number for the oil and/or boot kit?

Quote:
If your CV joint is already making noise, just adding lubricant probably will be only a temporary measure. You can get along with a noisy joint for thousands of miles but eventually you will need a replacement.
It HAS started to make noise, but only when it gets hot. So I figured the oil must have leaked out.

Quote:
Most folks (including myself) replace the half-shafts with rebuilt units; supposedly new made-in-China axles have also been showing up. IMHO, only name-brand rebuilders such as CVJ in Denver can be trusted to do a good job. Some forum members have had good luck with cheapo rebuilds from discount auto parts stores but others have not been so fortunate, lifetime warranty notwithstanding. The time it takes to R&R is not worth the few dollars you save.
I saw that German Star has new ones for about $260 each side, I wonder if those are Chinese. I have had too many bad experiences with Chinese made products to trust them in my vehicles.

Quote:
If you are just replacing the lubricant and fixing a leaky boot, you could do the swap but I really don't see the need. The only problem I've ever read involving Mercedes rear half-shafts is that the rubber boot cracks and splits open after 20 years or so. Then the lubricant leaks out, dirt gets in, and the joint is damaged. I have never read of a case where a CV joint failed due to anything else. (Doesn't mean it can't happen but would seem to be very rare and we have people on this forum with hundreds of thousands of miles on their cars.)
Yes, I put it up on the rack today expecting to see a torn boot and grease everywhere, but no tear!?! All four boots are still in tacked. I also check the flex disks and they are like new. I did notice that the propeller shaft slip yoke boot is missing.

Quote:
I have never read of a case where a CV joint failed due to anything else. (Doesn't mean it can't happen but would seem to be very rare and we have people on this forum with hundreds of thousands of miles on their cars.)
Well that figures, if it weren't for bad luck, I wouldn't have any luck at all!
__________________
'87 190d TURBO 200k
'84 190d 230k miles
'85 190d 107k miles
'88 190d 2.5 259k miles
'85 BMW E23 220k miles
'94 Chevy K3500 6.5L Turbo Diesel 232k miles

"Diesel Noise -- The Sound of Freedom"
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page