On my 83 300D the bushing in the throttle linkage on the firewall has completely come apart.
I am fairly certain that i can make this bushing from something else, but i am going to need some help for some specifications.
This is the part i am refering to
http://www.allpartsexpress.com/ShopByVehicle.epc?q=1983-MERCEDES--BENZ-300dt--/--L5--998cc--3.0l--Diesel--Fi--Turbo-Cables--Pedal--Lever--Components&yearid=1983%40%401983&makeid=MERCEDES+BENZ%40%40MERCEDES+BENZ%40%40X&engineid=1193778%40%40300DT++%2F+L5-2998cc+3.0L+DIESEL+FI++Turbo%40%40300DT&catid=Cables%2C+Pedal+%26+Lever+Components%40%40Cables%2C+Pedal+%26+Lever+Components&subcatid=Accelerator+Linkage+Mount@@Accelerator+Linkage+Mount&mode=PA
I need to know the dimensions from the plate to the outside of the bushing, as well as from the plate to the end of the rod.
This is purely from the firewall side towards the firewall.
Thanks for any help
Andrew