Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-25-2009, 02:22 PM
Registered User
 
Join Date: Jul 2009
Location: Tampa, FL
Posts: 70
Mysterious Coolant leak...

I have an 84 300D which has mysteriously developed a coolant leak on the front of the engine at what SEEMS like to be the hole that the arrow is pointing at. This is on the front of the engine just under the water pump:


What do ya'll think this is?
So here is the story:
I had just four days prior done a system flush, drained out all the old green crap, and had degreased it, had run a jar of coolant flush (was waiting for the citric acid to arrive). I replaced the thermostat as well. All was well in the world. Then I drove the car out of town, and when I parked it, there was a nice leak coming from the front of the engine. I checked every hose, the thermostat area, etc, but it doesn't seem to be coming from any of those places. It seems to be (but it is so cramped I can't tell for sure) to be coming from that hole. What is that hole? It seems to stop leaking when the reservoir tank is only about a 1/3 full, and will leak if I add more to it. I drove it 30 miles like this, and it was fine (no overheating etc) I stopped to check on everything, and added some more water just to be sure, and added 1/3 a cup of citric acid, just because I could. Well within 400 feet my car went to 110 degrees, so I pulled over just to see that now the leak seemed worse, but not that much. I pulled the thermostat (which is brand new) and now it doesn't overheat, but it still leaks in that hole. I have since drained everything out, but the leak is still there. What gives?

I disconnected the top hose from the radiator with the engine running, and it sprayed water everywhere, so I'm assuming the water pump is still good.


I'm about to pull the fan off and try to plug up the hole with some high temp muffler putty, but I wanted some input first. Thanks!
Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page