ok

Any buddy have any thoughts?

__________________
1976 240D
1976 240D parts car
1970 220D daily driver

for next time.

I concur... That should have been brought up initially. It's "a little late in the game" now.

I don't mind driving up there. The cool thing about having it at Pete's is that maintenance can be done there without anyone complaining about it, tools available, etc...


I would be open for a different location next time. Any ideas?

__________________
AJ

1985 300D (SOLD)

well apparently we need to change it for this one and ill talk with stuart about this and hopefully we can find something or I just wont do this crap and let others do it

How about someone talk with pete and ask what the deal is.
we have a month and a half.I wouldnt mind meeting somewhere else,I would prefer a shaded area though.A park perhaps or something like that.

as far as I know its still going to be there.. 79Mercy and I are putting this on and Pete is letting us do it as his shop. he has no hand in this other than letting us meet and hang out at the shop then drive somewhere for lunch.

I will be at the shop probably thursday prior to clean up and get stuff ready. If anyone else in the area wants to help that would be great.

this will be the last time there will be a gtg at his place, next time we will go elsewhere

TheDon - E320 Cabriolet
Hip001 - 1984 300D
79mercy - 1976 300D
snookwhaler - 1985 300D
::matthew - 1985 300D
colincoon - 1980 300TD
symbolic95-1984 300SD
ElkoftheMonth - 1976 240D
thebenzbar - ?
neumann-1980 300D or 85 300TD wgn
BabyBlueBenz - 1986 560SL
JonBobShinigin - 1987 300TD
Tfernandez - 1984 300CD

I'll take them Snook!

__________________

2006 Jetta TDI DSG 320k miles
1997 Ford F150 325k miles 4.2L V6 "Work Truck"
2008 Tundra 225k miles 5.7L
1982 240D.....sold
1984 300D...Totaled OUCH!
1985 300D Turbo 222k miles "Dos" sold to 79Mercy
1986 300SDL 98K miles "The Beater"....sold
1987 190E 2.3 16v Euro spec 115K miles....sold

There is Sand Point Park, or Fox Lake Park. I Know both locations have car shows from time to time! Fox Lake prob has more room, but Sand Point has a better location right off of US1 & Hwy406(garden Street).

Or maybe the parking lot where the old Walmart(and Belks) was. It is right on Garden St(hwy 406) 1/2 block west of Singleton Av. Lots of room to park, In the same parking lot as Publix, across the street from McDonalds, Wendys, and Subway. But again no shade!

__________________

2006 Jetta TDI DSG 320k miles
1997 Ford F150 325k miles 4.2L V6 "Work Truck"
2008 Tundra 225k miles 5.7L
1982 240D.....sold
1984 300D...Totaled OUCH!
1985 300D Turbo 222k miles "Dos" sold to 79Mercy
1986 300SDL 98K miles "The Beater"....sold
1987 190E 2.3 16v Euro spec 115K miles....sold

after this GTG we will convey and figure out our new place. Petes place will no longer be used as a gtg place after this. Stuart and I are in charge of this and will be doing everything. Only thing Pete has to do is come out as well and hang out and share his knowledge.

Confused

I thought the last gtg was at Pierre's. Is Pierre and Pete one in the same? The guy I met, whom I assumed was his shop, went by "Pierre", tall, thin, dark hair, drove the convertible MBZ on the afternoon drive.... Or does Pierre work for Pete? or whatever...please explain

Pierre Hedary aka Pete owns the shop where we have had the last few GTGs. After this, we're going to find another spot. Perhaps Orlando again?

__________________
1985 300D cali 190K

http://mercedes.thatchermathias.com/mw300d.jpg

I think that this time I can finally make the drive. Just wondering, but if I had say, I dunno, a timing chain, and I wanted to replace it, could I use a chain breaker/vice to replace the chain? Or would it be just too hot after a 3 hour drive? (Idea here being that I have no access to said tools and it would be expensive to try and do it here in Tampa)

when you do the chain you have to... it is not optional.. you have to use the mercedes crimp tool.

no serious work will be done at this gtg.