![]() |
|
|
|
#1
|
|||
|
|||
'99 E300 "License plate lamp replacement ?
Do you access the bulb by taking off external plate or by going thru inside which involves taking off entire inner trunk cover ? i took the external plate off but couldn't get bulb cover out - i was afraid to pull on it too hard - seems i remember reading here that this isn't an easy job - but i couldn't find out how thru searching - any ideas ?
|
#2
|
|||
|
|||
It is not too bad of a job. I took off the backplate and the trunk liner. The plastic retainers come off pretty easy. You need to work the liner around the trunk hinges a little to lower the panel. I was able to reach in there and release the plastic clips without removing the panel totaly. Thats the only access you will need and the lamp housing pops out at the removed rear trimpiece. Jim
__________________
1997 E300D Wife's daily driver 1985 300SD my daily driver 1999 Expedition family road trip and material hauler ![]() |
#3
|
|||
|
|||
Do yourself a favor and replace both at the same time or you will be pulling down that liner again within a year (ask me how I know!).
__________________
Marty D. 2013 C300 4Matic 1984 BMW 733i 2013 Lincoln MKz ![]() |
![]() |
Bookmarks |
|
|