|
|
|
|
|
#1
03-03-2010, 09:06 PM
|
||||
|
||||
|
Are these tumblers interchangeable?
I've got a replacement ignition switch/steering lock assembly for my '82 300D. This assembly is from an older W123 and the cap on the back of the switch is different, but I'm told I can swap in the cap from my current assembly.
What I'd like to do is swap in my tumbler, which you can see on the left in the photo below. They look NOT swappable to me. In fact, I'm not seeing that I can even do the ol' paperclip tumbler-remove method on the assembly on the right.  There isn't an obvious hole or slot like you see at 12 o'clock on the tumbler from my '82, just at the top edge of the first photo below.Not a tragedy to use a different key... but would be nice not to!  Thanks for any knowledge on this! -Chuck  
__________________
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1982 300D, anthracite grey, 260k miles, Greasecar 1999 E300D, black, 160k miles, Greasecar 2010 Honda Insight Hybrid http://www.chuckwyatt.com http://www.wordimpressive.com Last edited by whunter; 03-04-2010 at 01:23 PM. Reason: attached pictures 
|
| Bookmarks |
|
|
Threaded Mode
