|
|
|
#1
|
|||
|
|||
Glow plugs not working
I have a problem that is making me a bit crazy. My glow plug light does not come on and the timer relay does not click. I tested the plugs, they test good. I checked the bulb, it works. I checked for voltage to the timer and across the strip fuse, all good. #12 fuse, good as well. I have replaced the timer with one that I believe to be good to no avail.
Is there anything else in the system that would stop the the timer relay from operating? My car is a 1985 300D California spec. Gary '85 300 D '87 300 SDL |
#2
|
|||
|
|||
With the key in position 2, verify that you have power to terminal 15 on the smaller connector on the timer.
|
#3
|
|||
|
|||
Have you checked voltage at the glow plug with key on as tangofox007 suggests ?
I chased everything in my 300D and eventually needed a new ground wire to the relay. That was all it took. This came after trying a new relay, getting good voltage test results on glow plugs. Testing each glow plug. I drove with a maually operated glow plug system for weeks until solving this.
__________________
80 300D 340K Owned 30 yrs 83 300SD 440K Owned 9 yrs - Daily Driver 150mi/day 02 Z71 Suburban 117,000 15 Toyota Prius 2600 miles 00 Harley Sportster 24k 09 Yamaha R6 03 Ninja 250 |
#4
|
|||
|
|||
Glow plugs not working
I checked terminal 15 and do have power. I rechecked the Glow plugs per the Diesel Giant article and they are OK. Still no indicator light (it will come on momentarily when I plug the large (power supply) plug in. I guess the next thing to do is pull the plugs and check them individually. Any other ideas?
Gary |
#5
|
|||
|
|||
You could see if there is power being output on the five pins under the large connector. And check for continuity to ground on terminal 31.
|
Bookmarks |
|
|