DTP MW elements... anyone tried?
 

In due my recent search for new elements which I might need soon I have found some german based factory of MW elements for 300sd injection pump.

they are quite cheap (delivered at me home it will cost a 42 $ piece) which
makes me a bit suspicious ... anyone tried those ones yet?

Why do you want to change the Elements?

Over here if people have a problem with the Fuel Injection Pump they most often get a used Fuel Injection Pump.

Part of this is due to the high cost to have your Fuel Injection Pump setup on the Test Stand at a Fuel Injection Shop. This needs to be done because the Elements need to be adjuste; you cannot just swap them.

You might want to take a look at the superturbodiesel web site.

over here is almost impossible to find a proper working MW5 pump, M pumps is whole another story, tons are available,..but MW.... nope,..so when calculating cost of pump itself in US then shipment to Europe.... :cool:


edit: thanks,been lurking at STD a while ;)

What one like this?

http://www.peachparts.com/shopforum/diesel-discussion/306090-papas-got-brand-new-om617-ip-play.html

It is a non turbo pump but well the turbo ones pop up once in a while here...

There's a bloke in the south of Holland who imports quite a lot of stuff from the US

www.mercedes-only.nl

He'd be my first port of call...

TX,
hah..I guess some gooooogle translate tools will come handy ;)

He doesn't put up half of his stock on his web site - ring him if you're after something. I'm guessing he speaks English as his business depends on finding stuff in the states!