Does anyone have a photo of an OM603 installed? Ideally I'd like a photo taken of the injector side of the engine, installed in a 126.

Thanks!

__________________
Chief

1991 350SD

From my 91:

__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket

Tesla Model 3. 205,000 miles. Been to 48 states!
Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels.
2014 Cadillac ELR
2013 Fiat 500E.

Nice-Thanks!!!

I want to make sure everything is routed correctly as my engine comes back together- so far, so good!

__________________
Chief

1991 350SD

Some things are not routed properly on my car... it's had its engine replaced.

-J

__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket

Tesla Model 3. 205,000 miles. Been to 48 states!
Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels.
2014 Cadillac ELR
2013 Fiat 500E.

I didn't trust the photos I had of my '91 350SD as that engine had been out previously. Just trying to get everything routed the way the factory layed it out.

__________________
Chief

1991 350SD

Does anyone have good close photos of the vacuum lines off the pump at the front, and routing on the IP side? I'm hoping to get shots from an unmolested engine bay.

I've got the lines all connected right, but am just not satisfied with the routing at the front around the belt tensioner apparatus. I'm sure it wasn't right to begin with and I'd like to get everything to lay right. Thanks!

__________________
Chief

1991 350SD

Forgot I had this one too:



-J

__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket

Tesla Model 3. 205,000 miles. Been to 48 states!
Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels.
2014 Cadillac ELR
2013 Fiat 500E.

Thanks again. I'm still hoping to get a good close-up of the lines at the vacuum pump, behind the belt tensioner area.

__________________
Chief

1991 350SD

Any pics?

Thanks

__________________
Chief

1991 350SD

If you do a search for:

Coda journey daw_two

You will find lots of pics!!!

In addition, my 87 Champagne thread has some pics ---- please note, my 87 Champagne has an incorrect routing in the air intake manifold

EDIT ---- here u go: Coda, 1986 300SDL, the journey continues........

__________________
daw_two
Germantown, TN

Links:
Sold last car --- 05/2012 1984 300D Light Ivory, Red interior
No longer selling Cluster Needles Paint
No longer selling New Old Stock (NOS) parts

Past:
3/2008 1986 300SDL "Coda"
04/2010 1965 190D(c) "Ben"
& many more