81 300sd Italian Tuneup time

[ibenz]

I have my new set of injectors with fresh pop tested bosio nozzle.... I am going to change them out this weekend... From what i understand i should probably have new fuel lines for the injectors mine seem to be weeping already.

I also need a 8mm wrench, 17mm wrench, and a 22mm socket.
Does it need to be a certain depth socket or just a deep socket?

what is the 1 1/16" wrench for... I was using the diesel giant site for tips but seems to not have all the information that i need.

Fuel line sizes are 3mm?

I have new heat shields and will do the glow plugs at the same time.

any other tips would be awesome...