Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-04-2012, 09:08 PM
Registered User
 
Join Date: Apr 2009
Posts: 256
Not a very productive night tonight. The glow plugs are normally easy to take off once the intake is off, but the wires were spinning with the nuts and I didn't want to cause any damage. In any case, I had a hard time grabbing onto them so that the nut could be broken loose. All I accomplished tonight was to get the engine to TDC and get the glow plugs out.

I started to try and take off the rear water connection to the head, but it does not seem to want to move and I think I will have to unbolt it in a few places as it goes around the oil filter. All I got done there was to remove the retaining clip.

I did this once before on my other car, but it's been too long to remember. Anyone done this recently that has some good shortcuts?

I still need to get that off, the head temp sensor, the fuel filter and the front housing that holds the two temp sensors that connects to the radiator. Then I need to make a decision as to whether or not to remove the cam before taking off the head.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page