|
|
|
#1
|
||||
|
||||
OT Topsider refurb
The bigger hose on my Topsider collapsed so it looks more like a 300-ohm ribbon cable than hose. airpoweramerica.com has a hose kit for $9 with free shipping. Does Home Depot or a supply store have something better for the same money?
Thanks, Sixto 87 300D^2 |
#2
|
||||
|
||||
what all are you pumping through it?
hose is hose... but most of HD/Lowes stuff is for water. I'd try an auto parts store or Northern Tool before checking the box stores.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#3
|
||||
|
||||
I just upgraded mine to a bigger size tank and larger diameter hose (from 3/8 to 3/4). 3/4" sucks as well as drain much faster then 3/8.
The 3/4 clear hose I used is thick wall (1/8") and I purposely made it short (about 8") knowing it will get soft with hot oil and could collapse if too long. Here's a pic of it in operation. no problem with hose collapse
__________________
85 300D turbo pristine w 157k when purchased 161K now 83 300 D turbo 297K runs great. SOLD! 83 240D 4 spd manual- parted out then junked |
#4
|
||||
|
||||
Quote:
|
#5
|
|||
|
|||
I've never had any trouble with my end wrench and drain pan in almost fifty years of use.
__________________
2001 SLK 320 six speed manual 2014 Porsche Cayenne six speed manual Annoy a Liberal, Read the Constitution |
#6
|
||||
|
||||
Yeah, cheap and easy to make and works great. I use the hose clamp pliers as a valve to build up vacuum, then take pliers off and away it sucks.
__________________
85 300D turbo pristine w 157k when purchased 161K now 83 300 D turbo 297K runs great. SOLD! 83 240D 4 spd manual- parted out then junked |
#7
|
||||
|
||||
Quote:
The first time I used one, I took the drain plug out afterwards to make sure I got all the oil out. I was surprised not one drop came out.
__________________
85 300D turbo pristine w 157k when purchased 161K now 83 300 D turbo 297K runs great. SOLD! 83 240D 4 spd manual- parted out then junked |
#8
|
|||
|
|||
The dealers have an elaborate system for sucking out the oil. It saves them time and money and it gets the job done fine. For the DIYer, pulling the plug gets the oil out too. Is there something that will cause the engine to blow up if the oil is drained rather than sucked? I'm trying to figure out how the engine knows the difference.
__________________
2001 SLK 320 six speed manual 2014 Porsche Cayenne six speed manual Annoy a Liberal, Read the Constitution |
#9
|
||||
|
||||
Yes, and pulling the plug also makes a mess. Sucking the oil out of the dipstick tube is much much cleaner. With the oil filter accessed from the top it's almost a no brainer Just don't neglect the under-car inspection.
The drain plug has never been out in my 99 Jetta in the last 7 years I've had it -J
__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket Tesla Model 3. 205,000 miles. Been to 48 states! Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels. 2014 Cadillac ELR 2013 Fiat 500E. |
#10
|
||||
|
||||
Quote:
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#11
|
||||
|
||||
Quote:
__________________
85 300D turbo pristine w 157k when purchased 161K now 83 300 D turbo 297K runs great. SOLD! 83 240D 4 spd manual- parted out then junked |
#12
|
||||
|
||||
Me too!
Quote:
The other learning here is not to use the topsider as an excuse for never taking off the belly panels and inspecting the underside of the car. Jeremy
__________________
"Buster" in the '95 Our all-Diesel family 1996 E300D (W210) . .338,000 miles Wife's car 2005 E320 CDI . . 113,000 miles My car Santa Rosa population 176,762 (2022) Total. . . . . . . . . . . . 627,762 "Oh lord won't you buy me a Mercedes Benz." -- Janis Joplin, October 1, 1970 |
#13
|
|||
|
|||
On my Topsider I use the clear,hard, plastic tubing you'd use for running a water line to an ice maker. Available at any hardware store and comes in a array of sizes.
__________________
“Whatever story you're telling, it will be more interesting if, at the end you add, "and then everything burst into flames.” ― Brian P. Cleary, You Oughta Know By Now |
#14
|
||||
|
||||
So you insert the tubing inside the dipstick tube? I hose clamp my 3/4 i.d. clear flexible hose over the dipstick tube.
__________________
85 300D turbo pristine w 157k when purchased 161K now 83 300 D turbo 297K runs great. SOLD! 83 240D 4 spd manual- parted out then junked |
#15
|
||||
|
||||
Over, under, sideways, down
Quote:
In my case, as in Mike's, I use a small-diameter hard plastic tubing that goes down the dipstick tube to the bottom. Either way works. Jeremy
__________________
"Buster" in the '95 Our all-Diesel family 1996 E300D (W210) . .338,000 miles Wife's car 2005 E320 CDI . . 113,000 miles My car Santa Rosa population 176,762 (2022) Total. . . . . . . . . . . . 627,762 "Oh lord won't you buy me a Mercedes Benz." -- Janis Joplin, October 1, 1970 |
Bookmarks |
|
|