|
|
|
|
|
#1
08-14-2018, 02:32 PM
|
|||
|
|||
|
Head swap on a 603
The original #14 needs to come out I have a #17 that I want to install I’m looking for someone that is willing and have the knowledge to do the job the car is in Fontana Ca
|
|
#2
08-15-2018, 11:39 AM
|
||||
|
||||
OM603 Head Upgrade
AGA of Foothill Blvd. in Pasadena, ask for Victor .
That sucker is HEAVY ! . I took the one off the car in the junkyard but had Victor install it in my Brother's '87 300SDL . You really should replace all the cam followers with new from Mercedes, not terribly $pendy and yes, you can use new followers on an old cam as long as the lobes aren't ground up . Let us know how it goes .
__________________
-Nate 1982 240D 408,XXX miles Ignorance is the mother of suspicion and fear is the father I did then what I knew how to do ~ now that I know better I do better
|
|
#3
08-15-2018, 02:53 PM
|
|||
|
|||
|
Tanks for the information. Do you know a machine shop that can work on a 603 head ? I know a local shop in Rialto but he doesn't have the tools to remove the prechambers
|
|
#5
08-15-2018, 05:42 PM
|
||||
|
||||
|
OM603 Head Works
I assume you're wanting to have the valves done and the guides replaced long with new valve stem seals ? .
I used Metric Motors in North Hollywood, they're Russians who understand that success comes in cans, not in cannots . Remember to order the correct valve guide oil seals first from The Classic Center else you'll get whatever cheapo ones the Machine Shop has on hand ! . Victor also has a local place he uses .
__________________
-Nate 1982 240D 408,XXX miles Ignorance is the mother of suspicion and fear is the father I did then what I knew how to do ~ now that I know better I do better
|
 |
| Bookmarks |
|
|
Linear Mode
