|
|
|
#1
|
||||
|
||||
Astoria Boot Part Numbers & Source:
Need correct boots for a W116 diff swap. Lobro Style Axles came out of 1988 560 SEL with 210mm diff....
__________________
Did you just pass my 740 at 200 kmh in a 300SD????? 1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013 100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership |
#2
|
||||
|
||||
To the best of My Knowlege Astora only makes the 2 generic sized boots.
The FB3000 is the closest to the proper length the FB3001 is longer thicker and has a slightly bigger OD; or at least it looks that way in the pictures. For details: Astoria2000 | Flexx & CV boots Where to Find Axle Boots, Astoria Flexx Boots Where to find axle boots - PeachParts Mercedes ShopForum
__________________
84 300D, 82 Volvo 244Gl Diesel |
#3
|
||||
|
||||
Ahhhh....
Who makes a good direct-fit booty that HOLDS UP??????????
__________________
Did you just pass my 740 at 200 kmh in a 300SD????? 1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013 100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership |
#4
|
||||
|
||||
the Astoria 3001 is the boot I use on ALL my rebooted axles. it fits PERFECT on the 126 axle cans, and fits slightly loose on the 123 axle cans. using the included stainless steel crimp rings with a quality crimp pliers and you are SET for the next 10 years or so. I've been rebooting axles since... oh lemme check...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#5
|
||||
|
||||
since march of 2011
http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/273648-fs-rebooted-oe-pulled-axles.html zero returns yet, no complaints, all satisfied with their axles. I've used synthetic oil in most of them. some wanted the grease. I've got LOTS of grease left over as the boots all come with one bag of grease.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#6
|
||||
|
||||
I am swapping in a set of Lobro-style axles from a 560SEL, so the inner joint can be removed for easy installation.
The #3001 will fit both inboard and outboard locations???
__________________
Did you just pass my 740 at 200 kmh in a 300SD????? 1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013 100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership |
#7
|
||||
|
||||
yup.
look a them, the openings are about the same size. the inboard can is much larger, but the opening the boot attach to are the same size.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#8
|
||||
|
||||
Ok,
I have a brand new set of Febi boots for a W116. What are the chances they would work on my 560SEL axles?????
__________________
Did you just pass my 740 at 200 kmh in a 300SD????? 1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013 100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership |
#9
|
||||
|
||||
Hmmm not sure, the 560 likely has STRONG axles... are they larger?
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#10
|
||||
|
||||
Not sure. I will write the Febi numbers down. The W116 axles have large cans!
__________________
Did you just pass my 740 at 200 kmh in a 300SD????? 1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013 100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership |
#11
|
||||
|
||||
I bought a set of axle boots for my W116 back in 1996. The box the boots came in have been on my shelf since 1998. The boxes are marked Febi West Germany Part Number 126 350 03 37. The boost are marked Febi W. Germany GKNB3-2 153 15 75 00 010.
So, we know that W116 and W126 axles are the same length, with respect to either a 185mm or 210mm differential and Homokinetic or Lobro. The ‘126’ prefix means these may indeed work on my 1988 560 SEL axles. Does anyone make a tool to crimp the cams in place?????
__________________
Did you just pass my 740 at 200 kmh in a 300SD????? 1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013 100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership |
#12
|
||||
|
||||
@ vstec:
Think those will interchange???????????
__________________
Did you just pass my 740 at 200 kmh in a 300SD????? 1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013 100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership |
#13
|
||||
|
||||
post up a pic of the cams.
if it's a standard crimp ring, I'll bet nipper pliers would crimp them.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#14
|
||||
|
||||
126 350 02 37 (Outer) and 126 350 03 37 (Inner) are the same for both W116 & W126, according to our parts manual....
__________________
Did you just pass my 740 at 200 kmh in a 300SD????? 1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013 100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership |
Bookmarks |
|
|