Hello,

Thank you for reading.

I changeded out the steering lock mechanism and the ignition swith and that is fine now. Well I think it is.

Cept for:

Now that I am done- AfterMath

1. I don't have any of those Fiber Optics on inclined center panel, nor the tiny incandescent little light bulbs that fit into the 3 holes on the CCU, AC/HT, control. I see the Spider in the back up top but I think it is OK since so much "isn't working now".

2. I also have lost the turn signals also.

I looked for the Turn Signal Relay and I don't know if it is under the Radio or to the left of the steering shaft as you look up. This Black box has 14 pins on it and no power to any pins with key in RUN postion.

I checked all the fuses and cleaned a few.

I'd appreciate some help before I go any further.

Question:

1.Is the turn signal flash unit under radio or to left of steering column in a tall black box with 14 pins?

Is there something common that would cause the Turn Signal Flasher to go out and also the fiber optics and also the CCU unit incandescent little bulbs?

Something I knocked or disturbed working on the Ignition Switch??

I will keep looking.

Thanks,

Steve

__________________
1982 300SD