|
|
|
#1
|
|||
|
|||
210 Window Regulator Install & Synch (?)
I have a replacement rear window regulator and am wondering if I need to install the motor in a particular manner to be indexed to the position of the window.
Better said, Does the motor have internal limit switches ? If so should I run the motor to a limit and install with the regulator at same limit ? Thanks in advance, first time installing regulator.
__________________
Gary Experience is something you get, Just after you needed it.... '99 E300 295K, '83 300D 220K, '75 240D 185K sold '80 MCI Bus Conv DD 6V92TA, w/4 cyl. Kubota diesel GenSet 12.5KW |
#2
|
||||
|
||||
When I installed mine, I just pushed the UP button until the motor stopped and then attached the motor to the "bow" type cable and pulley system with it in the up most position. I think the motor somehow has a torque sensor and it "re-learns" it's limits when you re-sync after installation.
Sorry, that's probably confusing.
__________________
-Evan Benz Fleet: 1968 UNIMOG 404.114 1998 E300 2008 E63 Non-Benz Fleet: 1992 Aerostar 1993 MR2 2000 F250 |
#3
|
|||
|
|||
Thanks Kartek,
Actually No that is not confusing. If it is, probably it since you read mine !! Makes sense as it is easiest if window is up. I will try this tonight.
__________________
Gary Experience is something you get, Just after you needed it.... '99 E300 295K, '83 300D 220K, '75 240D 185K sold '80 MCI Bus Conv DD 6V92TA, w/4 cyl. Kubota diesel GenSet 12.5KW |
#4
|
||||
|
||||
Yeah, I think that's correct. I've done the task (rear) twice. Never made it a point to create any sort of reference. It does seem to handle the syncing on its own
__________________
1998 W210 diesel (wiped out by a texter) Baum spring compressor "for rent" |
#5
|
|||
|
|||
Duh, It could not have been easier more straight forward. It would have been better if MB dealer gave me four poprivets of the same size, I have to scare up the last onSe.
Should I lube the vertical track ?? If so, would a waterproof lube would be best ?? Thanks,
__________________
Gary Experience is something you get, Just after you needed it.... '99 E300 295K, '83 300D 220K, '75 240D 185K sold '80 MCI Bus Conv DD 6V92TA, w/4 cyl. Kubota diesel GenSet 12.5KW |
Bookmarks |
|
|