|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Last Call: 350SD OM603 Re-ground Crank, 2 "Latest Design" Rods, Block, Must Go
I posted this awhile back. Someone was going to come pickup the short block, but it never happened.
I pulled the SB apart, here's what I have. 2 of the latest design connecting rods and caps, used 30k miles, w/pistons installed. Reground crank, 30k miles. All journals appear near perfect, no scoring whatsoever. Can mike journals if SERIOUS. All bearings appear perfect EXCEPT rear main. Inserts have some grooves, NO corresponding marks on rear main journal. Bare block- bores did not evidence ovality, did no further exam for roundness or taper. Piston oilers, remaining pistons and original rods. If there is ANY interest, let me know asap. Thanks!
__________________
Chief 1991 350SD |
#2
|
|||
|
|||
Crank seems to be spoken for. Anyone else?
__________________
Chief 1991 350SD |
Bookmarks |
|
|