|
Turn signal lamps do not work - how to repair?
OK, took the car to an indy to install a new speedo cable. Speedo now works fine but the instrument panel turn signal blinker lights do not work. All exterior lights work; brake lights, turn signals, head lamps and fog lamps. I just changed out ALL fuses to the new copper design. What are the proper test procedures to determine why the inside turn signal blinkers do not work? I am thinking of starting with a check of the light bulbs themselves, then move to the actual electrical connection from the car to the instrument panel.
Isn't it the far left connector on the back of the instrument panel with multiple wires/prongs and the plastic "half moon" so that the connector is connected properly? If so, which wire do I test for a power on condition? I'm assuming I can use a multimeter.......
|
06-29-2014, 01:19 PM
Threaded Mode
