I been searching with no luck for somebody with the A&B light to rent it to check the injection timing in a 603 my friend sent a PM to MB doc and he doesn't answer is he the only one with this tool?

PM funola. He made one.

__________________
84 300D, 82 Volvo 244Gl Diesel

I know the problem is I'm in Fontana Ca and he is in New York

I have the tool. It is MBdocs old tool. I must have the full purchase price as the deposit. PM me. Ill get back to you later this eve or tomorrow. I'm quite busy, but I can get it out as soon as I receive the deposit.

__________________

Chris
84 280sl
82 300d euro

Why not just lock the ip and check static timing?

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42

Have people had any success with the pin locking tool for timing. It seems it would be difficult centering the tab. I have no experience using the locking tool.
the AB box is very fast. Aligning the timing marks takes as much time as installing the tool. My impression is the two are to be used together.

__________________

Chris
84 280sl
82 300d euro

I will send you a PM I used the pin locking tool when the Injection pump was installed the car is running fine but I want to check the injection timing because now the engine is louder then before sounds like a truck