Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-31-2014, 07:11 PM
Jeremy5848's Avatar
Registered Biodiesel User
 
Join Date: Mar 2006
Location: Sonoma Wine Country
Posts: 8,408
W124 Belt Tensioner Failure Hypothesis

The 124 diesels (and others?) have a somewhat complicated arrangement of parts to keep the serpentine belt under tension at all times. Many of us, including myself, have had tensioner failures. I have discovered a possible cause. (Yes, there may be other causes.)

The attached diagram (from EPC) shows the collection of bits and pieces making up the tensioner. Common failure items (besides the shock absorber) are the lever (5) and its pivot pin (17). The lever is aluminum with a plastic-lined bore where the steel pivot goes through. The lever rocks back and forth on a crude "plain bearing."

What happens, I found in both my cars, is that the plastic cap (47) cracks or falls off and is not always replaced ("it's just for decoration"). Also, the seal ring (29) is not always replaced when the assembly is serviced. Why, I don't know, but both my cars were missing this seal.

The result is that road water coming through the radiator carries dirt into the space between the lever and the pivot pin and turns the lubricant into grinding compound. Under constant pressure from the pull of the spring and the serpentine belt, the parts wear and gradually tilt. Hopefully the owner notices the noise and takes action before more damage is done—we've all read about what can happen.

My conclusion, then, is that everyone whose engines have this type of tensioner should make sure that cap 47 is present and undamaged. When time is available, it wouldn't hurt to take the tensioner apart and make sure seal ring 29 is also present. The cap and seal are not expensive parts—a few dollars each. It's also a good opportunity to clean the "plain bearing" and apply a light coat of fresh grease.

The alternative is to wait until the lever and pivot pin are damaged and then replace them (about $100 for the lever and $50 for the pin). Your choice.

Jeremy

Attached Thumbnails
W124 Belt Tensioner Failure Hypothesis-epc-tensioner.jpg  
__________________

"Buster" in the '95

Our all-Diesel family
1996 E300D (W210) . .338,000 miles Wife's car
2005 E320 CDI . . 113,000 miles My car
Santa Rosa population 176,762 (2022)
Total. . . . . . . . . . . . 627,762
"Oh lord won't you buy me a Mercedes Benz."
-- Janis Joplin, October 1, 1970
Reply With Quote
  #2  
Old 08-31-2014, 07:31 PM
vstech's Avatar
DD MOD, HVAC,MCP,Mac,GMAC
 
Join Date: Mar 2006
Location: Mount Holly, NC
Posts: 27,018
yup

THE SEAL IS A CHEAP PART THAT'S INVALUABLE!

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 560SL convertible
1987 190D 2.5-5SPEED!!!

1987 300TD
2005 Dodge Sprinter 2500 158"WB
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page