The PO removed the heater control cable from the dial temperature controls to the heater valves. Luckily the valves still work so when it's cold I can just open them up before getting in the car. But it would be nice to run new cables. Does anyone have information on what these are called or where the installation drawings would be? For the life of me I can't find them.

If it helps here is the valve I have in my car.
http://www.pelicanparts.com/More_Info/1238302084.htm?pn=123-830-20-84-M22&SVSVSI=3204
Thanks

So... You coming up,to my place to pull it?

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!

It's a bit far to NC. Is this a part you can't get new anymore? What manual would this be in?

Why did he remove them? Do your dials turn freely? I suspect your best bet might be a junkyard but you may have need of more than just the cables themselves.

- Peter.

__________________
2021 Chevrolet Spark
Formerly...
2000 GMC Sonoma
1981 240D 4spd stick. 347000 miles. Deceased Feb 14 2021
2002 Kia Rio. Worst crap on four wheels
1981 240D 4spd stick. 389000 miles.
1984 123 200
1979 116 280S
1972 Cadillac Sedan DeVille
1971 108 280S

Driver side OK, Passenger side not smooth. Both cables are cut at the valve so maybe they replaced the valve? The valve works fine.

I was able to finally find the cables here they are
123-830-03-31 $14.50
123-830-04-31 $16.50

They also have the dials for sale for $45.25 each
123-830-03-85
123-830-04-85