|
|
|
#1
|
|||
|
|||
P0106 Map Sensor issue (Location?)
I have a code and need to replace the MAP sensor on an 06 E320 CDI.
Is this the same as the "boost sensor" I see as I have read that they are different on these cars. If they are different, where are they both located? Does anyone have the MAP sensor part number? Thanks |
#2
|
|||
|
|||
IIRC the sensor is on the firewall on the driver's side. FWIW, unless the fault says something like "electrical fault in sensor" its much more likely the fault is with the pressure being measured and not the sensor itself.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#3
|
||||
|
||||
006-153-99-28. It's located on the intake pipe at the intake manifold (on the left side of the engine). |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|