|
|
|
#1
|
|||
|
|||
Simple question OM602 rack position sensor
I've traced down a random idle surge to a broken wire in the rack position sensor harness. I need to remove the connector from the sensor, so that I can locate the break. My simple problem is that I'm not sure if it lifts straight out or twists. Anyone know?
|
#2
|
||||
|
||||
It's a bayonet lock. Give a quarter turn to the collar (that stays with the IP) then pull off the connector. All of mine were stuck so I popped open the connector top and removed the wires when the IP had to come off.
Sixto 83 300SD |
#3
|
||||
|
||||
That plug can be a serious pain to get off. After turning 1/4 turn to release the plug, wiggle on it while pulling. It can take some real effort depending on how stuck it is.
__________________
Current stable: 1995 E320 149K (Nancy) 1983 500SL 120K (SLoL) Black Sheep: 1985 524TD 167K (TotalDumpster™) Gone but not forgotten: 1986 300SDL (RIP) 1991 350SD 1991 560SEL 1990 560SEL 1986 500SEL Euro (Rusted to nothing at 47K!) |
#4
|
|||
|
|||
Thanks, I'll give that a try.
|
Bookmarks |
|
|