PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   Skid Plate? (http://www.peachparts.com/shopforum/diesel-discussion/384302-skid-plate.html)

dennislarock 02-21-2017 11:29 PM

Skid Plate?
 
So, I changed the oil today on the *new* '84D... and, there is a Skid Plate under the Oil Pan??? It looks *stock* i.e., very nicely/perfectly fitted. It has a precise cutout for the Oil Pan Plug. I've never seen this before???

anyone else have/seen this???

Thanks,

dennis

Diseasel300 02-21-2017 11:36 PM

Are you referring to the "noise encapsulation panel" under the engine? Usually they're tossed away when the engine is serviced for better access/convenience. It isn't all that common to find a car that old with them still present.

Stevo 02-22-2017 12:18 AM

My five speed Euro TD came with one. its the first one I had seen.

jabstick420 02-22-2017 02:46 AM

I've got the oil pan and radiator skid plates installed.

They are heavy duty and well made.

You could bottom out with confidence. And some sparks!

dennislarock 02-22-2017 04:44 AM

Interesting... I'm removing it later this week so that I can clean the bottom of the engine. Once I get all leaks taken care of I'll probably put it back on... this will be my wife's car ...look at my sig below and you will see why!

Thanks!

dennis

MBeige 02-23-2017 12:31 PM

If it looks like this then it is a factory oil pan skid plate.

https://c2.staticflickr.com/6/5458/7...b89dd503_c.jpg

shertex 02-23-2017 01:10 PM

Mercedes calls them anti-noise panels (or encapsulation panels)...in practice they retain fluid drippings in older Benzes.

Still have mine on my 91.

HarvAMG 02-23-2017 01:35 PM

Wish I had one of these. Guys usually load those up with oil pads then swap them out every oil change. No leaks.

jabstick420 02-23-2017 02:31 PM

Quote:

Originally Posted by HarvAMG (Post 3685900)
Wish I had one of these. Guys usually load those up with oil pads then swap them out every oil change. No leaks.



tell me more about this...


I have the plate installed and a few drops of oil go through the concave opening where the hole is.


I imagine any absorbent pads that go there would need to be secured somehow, zip ties, Velcro?

t walgamuth 02-23-2017 03:01 PM

There is no noise encapsulation panel on an 84....is there?

kerry 02-23-2017 03:22 PM

Years ago there was a thread about the Dutch TD owner who took his wagon to Africa. (?). He installed the factory skid plate as I recalled and the factory lift it to raise the body. Anyone else remember that with the wagon covered in red dust?

MBeige 02-23-2017 03:28 PM

Quote:

Originally Posted by kerry (Post 3685931)
Years ago there was a thread about the Dutch TD owner who took his wagon to Africa. (?). He installed the factory skid plate as I recalled and the factory lift it to raise the body. Anyone else remember that with the wagon covered in red dust?

He is (was?) a member here, his name is Jurgen.

https://www.flickr.com/photos/300tdorg/albums/72157609267375263

t walgamuth 02-23-2017 03:31 PM

No but my white 280e euro came with a skid plate like the one pictured and tall springs kit. I believe it also had 15" wheels and tires from the factory too. It was outfitted for the American Ralley of 84 which ended up being cancelled due to unrest in some of the key countries it had to run through. It was to have started in LA and ran to Alaska then to the tip of south America and back to LA.

jabstick420 02-23-2017 03:46 PM

This guy Jurgen is a bad-ass!

HarvAMG 02-23-2017 06:50 PM

Quote:

Originally Posted by jabstick420 (Post 3685918)
tell me more about this...


I have the plate installed and a few drops of oil go through the concave opening where the hole is.


I imagine any absorbent pads that go there would need to be secured somehow, zip ties, Velcro?

However you want basically.

Looks like this.

https://dq4zp01npifg0.cloudfront.net...?itok=vdj7RAzo


All times are GMT -4. The time now is 03:57 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website