![]() |
|
|
|
#1
|
|||
|
|||
Flushing the block clear.
I took an old heater core hose, old cheap garden hose and a piece of the flex left over from plumbing a water filteration system I designed for heavy well water a few years back.
Of course I removed the block plug on the right side of the engine. The only problem I had was finding the torque for the bolt. I didn't have a replacement for the aluminum washer on the drain bolt so I filed and sanded the surfaces smooth. If someone can tell me what the torque spec is on this bolt I'll get on with my life. FYT I've attached pics of the hookup. ![]() ![]()
__________________
84 300SD 85 380SE 83 528e 95 318ic |
Bookmarks |
|
|