Just discovered that I have Girling rear brake calipers on my W123. ID'd by the G stamp and the 320327 cast into the caliper. Uses dust cover by FAG rs38551

Are these rebuildable??? If so, which seal kit do you use??

There's plenty of info on ATE and Bendix calipers, but little on Girling. These use the cross bar type pad spring with pins that use cotter pins. All three brands use the same pad size.

I just bought Centric 14335003, which is hilariously wrong. RA didn't specify if that was for Bendix or ATE. Definitely no Girling specific rebuild kits to be found anywhere. I've heard that Bendix reseal kits will work on my Girling. True?? Then again i've also seen Bendix reseal kits with the funky metal ring/dust boot retainer spring, which my Girling does not have.


Thanks!!