![]() |
|
|
|
|
#1
|
|||
|
|||
No Start After Alignment
I got everything adjusted, removed the spreader bar, closed the hood, then jumped in a turned the key. The glow plug light burnt dimly and the tachometer needle started a weak dance between 1 and 2K. After a second or two, the glow light went bright yellow, the tach needle red-lined, and a short buzzing sound came from somewhere. But the car didn't turn over.
I've heard stories of a neutral safety switch. I think the PO might have said something about it being disabled, but I wouldn't swear to that. Does this problem sound familiar to anybody? I did put it in neutral in order to roll it over the slip plates, if that provides any more useful information.
__________________
1982 300CD Petrol/Black Leather |
#2
|
||||
|
||||
Weak battery maybe?
I could have sworn there is a big fuse somewhere inside of the glow plug relay. I would check the battery voltage and then pop open the glow plug relay to take a look.
__________________
-Typos courtesy of my mobile phone. |
#3
|
|||
|
|||
11.92V at the battery and the strip fuse is intact.
I put the trickle charger on the battery, but the symptoms were very strange.
__________________
1982 300CD Petrol/Black Leather Last edited by 1983/300CD; 04-23-2019 at 02:19 PM. |
#4
|
|||
|
|||
12.6 volts Fully charged automotive batteries should measure at 12.6 volts or above. When the engine is running, this measurement should be 13.7 to 14.7 volts. If you don't have a multimeter to tell you the voltage of your battery, you can do a test of your electrical system by starting the car and turning on the headlights.
__________________
96 E300d |
#5
|
|||
|
|||
11.92 volts is low and is probably the root of your problem. A good battery will show more like 13-14 volts.
|
#6
|
|||
|
|||
Well, it looks like probably a new battery for me. I wonder if it is worth getting a Sam's club membership yet...
__________________
1982 300CD Petrol/Black Leather |
#7
|
|||
|
|||
Quote:
Check at Wal-Mart and at Home Depot. My last battery was $130 at Home Depot, no core required, so I sold the old battery for $40 to the local metal recycle place.
__________________
Respectfully, /s/ M. Dillon '87 124.193 (300TD) "White Whale", ~392k miles, 3.5l IP fitted '95 124.131 (E300) "Sapphire", 380k miles '73 Balboa 20 "Sanctification" Charleston SC |
#8
|
||||
|
||||
Quote:
A 49 is heavy enough that not taking the core refund can be a good idea for a few bucks. But I’ve seen core fees as high as $22. Napa sells Deka batteries and I prefer them and Exide to any JCI batteries since that all got offshores to Mexico. IMO/E the exide leaking thing was old news due to overtorquing and not applying dielectric grease. A little prevention and they’re great. And USA made. I’ve had multiple JCI batteries go south on me too fast. I’m also a fan of the white MB Battery if they still make it...
__________________
Current Diesels: 1981 240D (73K) 1982 300CD (169k) 1985 190D (169k) 1991 350SD (116k) 1991 350SD (206k) 1991 300D (228k) 2008 ML320 CDI (199k) 1996 Dodge Ram CTD (442k) 1996 Dodge Ram CTD (267k) Past Diesels: 1983 300D (228K), 1985 300D (233K), 1993 300D 2.5T (338k), 1993 300SD (291k) |
#9
|
||||
|
||||
Quote:
The regular membership is $45 for a year. Very much worth it. The Mrs and I buy a ton of bulk meat and dry goods. We even opted for the cash back membership which ironically has paid for itself. I know it's sacrilege, but I absolutely loathe and detest Costco. Worst club shopping experience ever. The stores are always mobbed with people (even on off hours), the organization is pathetic, they're always moving stuff around so you can't find what you need, and the damn line for receipt checking is always so damn slow.
__________________
-Typos courtesy of my mobile phone. |
#10
|
||||
|
||||
Check the engine to chassis ground strap and make sure it's tight and not corroded.
__________________
Current stable: 1995 E320 157K (Nancy) 1983 500SL 125K (SLoL) Gone but not forgotten: 1986 300SDL (RIP) 1991 350SD 1991 560SEL 1990 560SEL 1986 500SEL Euro (Rusted to nothing at 47K!) Gone and wanting to forget: 1985 524TD 167K (TotalDumpster™) [Definitely NOT a Benz] |
#11
|
|||
|
|||
I’d check the engine to chassis ground first thing.
__________________
Current fleet 2006 E320 CDI 1992 300D - 5speed manual swapped former members 1984 300D "Blues Mobile" 1978 300CD "El Toro" |
#12
|
|||
|
|||
11.70 V is fully discharged, you are at about 25% . Charge the battery for a few hours then put a load test on the battery to determine it's condition.
|
#13
|
||||
|
||||
To check the NSS or the shifter bushings, put it in park and bridge two screws in the plastic case on the passenger wheel well. If it will spin the starter, it is could be the NSS or bushings.
|
#14
|
||||
|
||||
Did you do the alignment? Someone else?
I’ve observed an alignment once where the tech kept turning the vehicle on and off. Leave the key in the wrong position and glow plugs and fan might keep running. Add a few starts and a weak battery, and... voila.
__________________
Current Diesels: 1981 240D (73K) 1982 300CD (169k) 1985 190D (169k) 1991 350SD (116k) 1991 350SD (206k) 1991 300D (228k) 2008 ML320 CDI (199k) 1996 Dodge Ram CTD (442k) 1996 Dodge Ram CTD (267k) Past Diesels: 1983 300D (228K), 1985 300D (233K), 1993 300D 2.5T (338k), 1993 300SD (291k) |
#15
|
||||
|
||||
On the W123 Sedans with a turbo there is a wiring junction box on the passenger Fender Well that you can use a jumper wire on.
It goes right down to the Starter See post #8 https://www.benzworld.org/forums/w123-e-ce-d-cd-td/1626516-start-84-300d-without-key.html
__________________
84 300D, 82 Volvo 244Gl Diesel |
![]() |
Bookmarks |
|
|