Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-12-2002, 01:06 PM
surfblau's Avatar
neue Dieseler
 
Join Date: Feb 2002
Location: san francisco - immer kalt, immer windig, I want to move
Posts: 382
guide rod mount replacement problems

Need input on sorting out my guide rod mount replacement.

There has been a popping, bumping, rumbling noise at low speed on the right front and rear of my "new" SDL that I have owned for three weeks. This weekend I replaced the right upper control arm(had lots of play), the guide rod mount(urethane boot was completely destoyed) and both rear sway bar links (boots cracked on both). The good news is that all the rattly noises are now gone. So I took the car to get it alligned.

They said that the guide rod mount needed to be replaced (the one that I just installed). It was "loose and moving all over the place when it was on the rack". Another quote was "whoever installed the guide rod mount forgot to install the rubber bushing", near as I can tell, they were referring to the iron cross looking rubber spacer that is located between the back plate of the mount and the mount itself- this is the rubber that protrudes through a hole in the back of the plate like a nipple, in other words, you can see whether it is there by looking, and it is there. Then they tried to tell me that the guide rod and the guide rod mount were a single unit that do not come apart and are sold only as one unit. They said I also needed a "center link- it is real cheap only a $40 part", though my drag link looks pretty new with its boots completely intact. Then he berated my S rated tires saying that I really needed H rated (like I ever exceed 112 or anything close). In summation, they said that they couldn't align it without replacing the above parts.

Here is where I am now. The car drives exactly the same as it did when I bought it, minus the rattling. It still pulls slightly to the right. The only questions I have are

1. Should the guide rod have any visible deflection in the longitudinal direction when loaded?
2. What is the test to see if the drag link (hopefully aka center link) is bad?

I think I will get attempt to get it aligned somewhere else....


thanks- I feel better now.
__________________
84 300TD - 235k - Farbe "Surfblau" bought at 213k
87 300SDL - 131k - Farbe "PimpGold" bought at 115k
00 Klepper Faltboot Expedition Double
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page