|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Urgent help needed on OM603 piston 2nd compression ring orientation.
I need help to find out the orientation of the second compression ring (2mm) on the piston. It is a bevel ring but should the bevel be facing up or down? There is no mark or dot on the ring. Take a look at the spare piston if you happen to have one.
Thanks.
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed. W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html 1 X 2006 CDI 1 x 87 300SDL 1 x 87 300D 1 x 87 300TDT wagon 1 x 83 300D 1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry. |
#2
|
|||
|
|||
My scan of an engine manual for the 90/91 602.962 and 603.970 show the bevel upwards. A scan of a manual for the .931 .942 and .972, and a scan of a general OM600 manual, don't indicate anything other than to have the gaps at 120deg to each other.
Edit: Come to think of it... I have several new OM60x pistons stashed away, I'll have to dig them out of storage and take a picture tomorrow. |
#3
|
|||
|
|||
Thank for the information. Really appreciated.
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed. W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html 1 X 2006 CDI 1 x 87 300SDL 1 x 87 300D 1 x 87 300TDT wagon 1 x 83 300D 1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry. |
Bookmarks |
|
|