|
|
|
#1
|
|||
|
|||
OM642 help
My 2008 E320 had the dpf removed and sent out for cleaning at 255k miles and on the road to my current mileage 270k miles I’ve been fighting intermittent dpf codes. In between this mileage I’ve replace the EGR, PCV, B60 exhaust backpressure sensor, b28/8 Dpf differential pressure sensor and a manual regen between oil changes.
Current error codes: 3148-001 Ash content of diesel particulate filter, ash content too high 3006-001 exhaust backpressure downstream of dpf, b28/8 engine protection 2940-002 boost pressure control via throttle valveNegstive control variation closed major The freeze frame values for the ash content change every time the error code is deleted. What could be going on? The dpf sensor is new could this be due to a bad turbo actuator ? Thanks in advance |
#2
|
||||
|
||||
Are you in a state that enforces compliance with emissions?
__________________
-------------------------------------------- Old Blue - 83 240D 6 speed manual trans, OM648 Green Machine - 2001 Europa G500 87 300SDL Bought on Peachparts. Low-ish miles..? Family Truckster - 2012 VW Touareg TDI Patchouli Wagon - 2004 E500 - SOLD 333k mile 97 BMW 750il V12. - SOLD The Californian - 85 300TD - SOLD Daily Super Sedan - 03 Audi S8 -SOLD |
Bookmarks |
|
|