My 1976 240d started thumping in the right rear every time I turned right. I searched under thumping and found several had been sway bar links and how to check them and crawled under the car and immediately found the right sway bar link completely off. I ordered the parts from Phil on Wed and they came Friday but my chilton does not mention the link at all.
The part is simple and it is obvious where it goes but the question is, does it just screw into the cover plate on the back side of the hub or does it have a nut on the inside behind the wheel and I need to pull the wheel and hub to get to it?
Are there any tricks or anything I should watch for?

I also bought the front sway bar bushing kit since I get some thumping from the front when going over bumps. Any suggestions on this job, once again nothing in the chiltons.
Thanks for the help.

__________________
Ncnetman
1978 300cd fresh paint
1965 Mustang
1968 Torino GT fastback
2015 VW Passat TDI
1969 Ranchero- project
1974 240d 4-speed -for sale
1976 240d - for sale
1990 6.2 Suburban 194k-getting a 6.5 turbo
2008 Duramax Silverado-totaled
1959 Chev 3100 Fleetside - sold