Hi,

The turbo seals and the oil/air separator seals all need to be replaced. I wish to do thisbefore too long.
As I dont wish to remove the turbo, I will go the route of dropping the oil pan to do the oil drain grommet. From doing searches, I have come up with a list of items I believe Ill need. I would appreciate if someone could look over the list to make sure I am complete in my needs, so I dont start the project to find that Im missing stuff...

Turbo drain seal part:
-Turbo drain gasket
-Turbo drain grommet
-Turbo drain O-ring
-Optional lower turbo drain pipe (in case the other one bends)

Oil/Air Separator Part:
-Two O-rings, for theupper and lower ends of the tube (same ones as for the dipstick, correct?

General Parts:
-Oil pan Gasket
-Degreaser


Is this about correct? Any tips to make this go easier? Can I do this without lifting the front end of the car?

__________________
Current Diesels:
1981 240D (73K)
1982 300CD (169k)
1985 190D (169k)
1991 350SD (116k)
1991 350SD (206k)
1991 300D (228k)
2008 ML320 CDI (199k)
1996 Dodge Ram CTD (442k)
1996 Dodge Ram CTD (267k)

Past Diesels:
1983 300D (228K), 1985 300D (233K), 1993 300D 2.5T (338k), 1993 300SD (291k)