Doing a quck view of my timing chain stretch via the line up the marks method.

The knife blade is on zero. NO not the mark prior to zero but dead center on the actual "0" stamped on the pully.

There appears to be a line mark that is just to one side of the zero and before the pin. I'm guessing this is the actual zero mark. If Im understanding that correct, then I have approx. 1 degree of chain stretch?

here is what I have the "i" is line stamped into the pully. The "v" is where my knife blade sits, and the "p" is where the pin is. "10" and "0" are also stamped into the pully


.......v........
1i0 i 0i p

ok.... lets see if this word pic gets chopped up by this forum

Again...... is this about 1 degree of chain stretch?

__________________
"Know other lessons I need to learn? TELL me. Tired of learning'em the hard way".

Glow Plug Wait: [i} Time of silence in homage Rudolph Diesel. Longer you own a diesel. more honor you give". [/i]

Life; SNAFU Situation Normal All Fouled Up, & FUBAR: Fouled Up Beyond All Repair

-Now: Snafued Jeep TJ w/OM617 2Be daily driver & building SS M1079 w/Ambo boxed /live in Adv. Truck, Diesel KLR conversion
-Sold 62 UNIMOG Camper w/617 Turbo, 85 300SD