where can i get OEM key blanks for my '91? the websites and locksmiths have key blanks, but theyre not OEM, but they look similar. i want the genuine MB keys.

thanks

__________________
1991 300 D 2.5 Turbo, 220k
also in the family:
1981 240 D 185k
1991 350 SD 185k
2006 S 500
2005 SLK 350

Why not just go to the dealership and get keys already cut for $20?

__________________
http://www.benzworld.org/forums/imag...e_steering.gif
1998 C43 ///AMG
1999 C230 Custom 5-Speed Manual

$20
My dealer wanted something like $75 for my SD. Maybe they got cheaper with the later models.

__________________
past MB rides:
'68 220D
'68 220D(another one)
'67 230
'84 SD
Current rides:
'06 Lexus RX330
'93 Ford F-250
'96 Corvette
'99 Polaris 700 RMK sled
2011 Polaris Assault
'86 Yamaha TT350(good 'ol thumper)

$75?????? Kick 'em in the ass 'til one eye's crooked! That'll teach 'em!

theres a locksmith (not walmart!) that has cut MB keys for me before, but they werent OE, but they worked fine.

well, i guess il check otu what they got at the dealer, that actually never crossed my mind.

thanks

__________________
1991 300 D 2.5 Turbo, 220k
also in the family:
1981 240 D 185k
1991 350 SD 185k
2006 S 500
2005 SLK 350

My dealer actually sent me over to a local locksmith(in Bellevue Wash.) that has the blanks and the equipment to make 'em. Cost me something like $40 per copy. So some do have the abilty to make them, and cheaper than the dealer. But of course they're not "official" Mercedes blanks.

BTW, I think his eyes were already a bit skewed

__________________
past MB rides:
'68 220D
'68 220D(another one)
'67 230
'84 SD
Current rides:
'06 Lexus RX330
'93 Ford F-250
'96 Corvette
'99 Polaris 700 RMK sled
2011 Polaris Assault
'86 Yamaha TT350(good 'ol thumper)

My local dealer just cut me two keys for $19.82 each. There not cheap but $40 each is a little high.

__________________
2016 Corvette Stingray 2LT
1969 280SE
2023 Ram 1500
2007 Tiara 3200

Gosh, unless I have lost my mind... no bets on that possibility please... I went to the local Ace Hardware... and they had a key that would work...and cut it ... for about $5 four years ago for my 1981 wagon.....
I need a key for my 240... will go check to see if they can do it again.... and let you know...

Go to the Star Motors dealership on Old Katy Road. They're friendly, and the key will not be $75, but way cheaper. I think it's 7000 Old Katy Road. To get there, you take the Katy Freeway (I-10 West) to the Washington Ave. exit, and turn right. When you get to the fork in the highway, take the left fork to Katy Rd., and after you go under the RxR tracks, the dealership will be on the right.
-Joe

__________________
'81 MB 300SD, '82 MB 300D Turbo (sold/RIP), '04 Lincoln Town Car Ultimate

Sooner or later every car falls apart, ours does it later!
-German Narrator in a MB Promotion Film about the then brand new W123.

I paid $4 for a copy at a local locksmith, they had a blank that fit. It works better than the old worn key.

__________________
Think Alternative Energy!
300CD '80 (now gone but not forgotten...)

If memory serves, 126 and later keys are different than 123 and earlier keys, and need to be done by M-B.

BTW, those keys that some of you have found at a locksmith that work, do they work as a master key, or as a valet key? If they work as a master key, does anyone know where the blanks might be acquired (operative word: "blank"; I cut my own keys)? Every place I've been to that cuts keys doesn't have any blanks for M-B's.

I've mentioned this before, but I'll say it again; maybe it'll help someone if they can't find any 123 blanks around. I've found that a key blank for some Hondas can be modified to work in a 123 lock cylinder. The only thing is, it will work as a valet key; you won't be able to open the trunk, passenger's door, or glove box with it. They work the driver's door and key switch just fine, though.

You need to take your 123 key and hold it next to the key blank to see how far the rear shoulder needs to be cut back. You then need to cut the rear shoulder on both sides to match that; go too far and the key may go in too much; don't go far enough and the key won't go all the way in. Once that's done, it's just like cutting any other key.

Hey Warden,
My key works as a master.
I would be happy to go to the locksmith and send you some blanks if it is a W123 you are dealing with.

__________________
Think Alternative Energy!
300CD '80 (now gone but not forgotten...)

All you folks talking about locksmiths cutting keys or doing them yourself should be aware that the original keys are steel. Do not use a brass replacement key, because it will wear down and the resulting particles will clog up the tumbler.

__________________
Rick Miley
2014 Tesla Model S
2018 Tesla Model 3
2017 Nissan LEAF
Former MB: 99 E300, 86 190E 2.3, 87 300E, 80 240D, 82 204D Euro
Chain Elongation References

Thats why I have some metal dust in front of my ignition switch. Dooh

__________________
Think Alternative Energy!
300CD '80 (now gone but not forgotten...)

I had a replacement key break once in my 300CD, and it only lasted whole 2 years , but I got it at my local locksmith for $3... So I guess you are right about not using the non-MB replacement keys...