I recently adjust what I think is called an alda on my 1995 e300d
and the bolt screw stripped were would I be able to buy a new or can it be removed or moded or even if I can fix it the srcrew can be pushed and just pops up and can not be screwed i.e stripped


any help you be appreciateD

__________________
With god all things are possible -Mark 10:27

Your 95 doesn't have an ALDA. Please use punctuation.

__________________
CENSORED due to not family friendly words

THE FUEL AIR OR Baromtric adapter on top the fuel injector pump next to the ide adjuster

__________________
With god all things are possible -Mark 10:27

what is it called then

__________________
With god all things are possible -Mark 10:27

Why are you even messing with it? The N/A diesels rarely need adjustment to the barometric capsule, it isn't like the turbos where the seals dry out and leak boost pressure.

__________________
Current stable:
1995 E320 149K (Nancy)
1983 500SL 120K (SLoL)

Black Sheep:
1985 524TD 167K (TotalDumpster™)

Gone but not forgotten:
1986 300SDL (RIP)
1991 350SD
1991 560SEL
1990 560SEL
1986 500SEL Euro (Rusted to nothing at 47K!)

I wasn't I geuss who ever owned it before did and stripped it the car runs well
Im just doin preventative maintenance

__________________
With god all things are possible -Mark 10:27

You'll have to find a Bosch diesel injection shop, or find a used example.

__________________
Respectfully,
/s/
M. Dillon
'87 124.193 (300TD) "White Whale", ~392k miles, 3.5l IP fitted
'95 124.131 (E300) "Sapphire", 380k miles
'73 Balboa 20 "Sanctification"
Charleston SC

pull the pump and weld/tap it, or helicoil. tho im not sure if the helicoil can work cause of case fuel pressure.