|
|
|
|
|
|
|
#2
10-30-2008, 10:57 AM
|
||||
|
||||
|
Yes it is 130 eur but this forum members get it for 120 eur.
These rods are just bolton even with a stock bolts yes it is the same rods for m103, m104 3,0 and m102 2,3-16v but I can noy answer if it is the same for m104 3,2the same. Any body has M104 3,2 rods and can check those sizes? So then I can can fix them too. 
__________________
MB 300E 24v Turbo MS3X TURBOCHARGE YOUR MERCEDES www.turbobandit.com My band! https://www.facebook.com/pages/Turbobandit/135610656626424?fref=ts 
|
|
#3
10-30-2008, 11:04 AM
|
||||
|
||||
|
Many other cool part on the way
 Begining of 2009 even with a own Turbochargers with our own Turbobandit design and specially tested on Mercedes for the best spooling curve and even stronger then garrett and real Antisurge intake  We even testing plug & play MS ecu for mercedes. Even bolton harrness for older K-jet models We tryed BMW plug & play and it works real good. This week we are done plug&play MS for Audi 20v , first ms in the world reading audis stock 135-1 trigger
__________________
MB 300E 24v Turbo MS3X TURBOCHARGE YOUR MERCEDES www.turbobandit.com My band! https://www.facebook.com/pages/Turbobandit/135610656626424?fref=ts
|
|
#4
11-02-2008, 11:57 PM
|
|||
|
|||
|
hey pumpish you have influenced me to do the same mod on my 190e 2.6
I was wondering if you can fabricate those very nice looking intakes for the 2.6 as you did on your turbo car. Because in the future i want to add different intake, electronic fuel and spark and perhaps a turbo. I want to see how much HP and torque i can get with JUST intake, and electronic fuel and spark. I think about 200+? Stock is 166
|
 |
| Bookmarks |
|
|
Hybrid Mode
