Boost questions on OM606... - Page 5 - PeachParts Mercedes-Benz Forum

kynsi · #61 11-22-2007, 12:49 PM

Quote:

Originally Posted by altz

jep second that...
400hp and lots of torqe and only 13.5?
The car should do low 12-s IMO...
no traction?

There is also one video. In link I send earlier. Video no.3 of 13.07.07.

And there is not big lag whith hx40.

altz · #62 12-08-2007, 03:58 PM

Quote:

Originally Posted by kynsi

There is also one video. In link I send earlier. Video no.3 of 13.07.07.

And there is not big lag whith hx40.

But what elements to you use in the pump? They have said to be 7mm, but where do you get them? From somekind other car pump? Truck?

altz · #63 12-12-2007, 10:08 AM

anyone?

gsxr · #64 12-12-2007, 10:12 AM

Probably from Myna Diesel... they are the only place I know of that sells 7mm pump elements. If there's another source, I'd love to know...

We can get 6mm pump elements from Bosch, but I don't know how much power those will produce.

altz · #65 12-12-2007, 10:32 AM

Quote:

Originally Posted by gsxr

Probably from Myna Diesel... they are the only place I know of that sells 7mm pump elements. If there's another source, I'd love to know...

We can get 6mm pump elements from Bosch, but I don't know how much power those will produce.

whats the price of 7mm elements ? @ myna diesel?

gsxr · #66 12-12-2007, 10:54 AM

I think the 7mm elements are $100 each... but I'm not sure if that's $100 USD, or $100 EUR, each.

The 6mm elements are less than $100 USD each from Bosch.

altz · #67 12-12-2007, 02:07 PM

Do you have a link to their site ? I didint found it myself.
Thanks!

kynsi · #68 12-12-2007, 02:30 PM

Yes, the pump is made in Mynä Diesel (7mm). Place makes lots of pumps to tractor pulling also. Base pump is mercedes 124 e 300 diesel original pump. I think that the boost unit is added afterwards.

gsxr · #69 12-12-2007, 03:53 PM

I can't find any website for Mynä-Diesel, but here's a link with some phone numbers and an address:

http://www.yritysopas.com/tiedot/Mynamaki/Myna_Diesel_Oy.html

kynsi · #70 12-16-2007, 02:08 PM

Quote:

Originally Posted by kynsi

Engine is 606.91x non turbo 24v (stoc)

. Pump has different cam that 603 whith quicker lift. That makes little cracking sound at 2000rpm. Modified in mynä diesel.

After the dyno session I have adjusted thottle pedal for more power, and added also boost to 1.75 bar (no smoke). That has made the 235 go slippery at 130km/h. But 265 getrak went broken 4 months ago. So nothing has happened after that.

I heard a rumor today, that there could be different connecting rods in this engine. Person who had changed the rods is dead, so it is a mystery till next opening.

altz · #71 12-17-2007, 10:36 AM

has anybody in finland killed a om603 motor? How are the 500hp and 400hp cars driving?

kynsi · #72 12-17-2007, 11:34 AM

Quote:

Originally Posted by altz

has anybody in finland killed a om603 motor? How are the 500hp and 400hp cars driving?

Yes, there are total kill of 603 happened even whith stock turbo

. And too much revs kills stock rods quikly.

gsxr · #73 12-17-2007, 12:04 PM

Wow! What happened to kill a 603 with a stock turbo? How much power was it making with the stock turbo? I thought it couldn't do much more than about 200hp or so?

gsxr · #74 12-17-2007, 12:06 PM

Quote:

Originally Posted by gsxr

I think the 7mm elements are $100 each... but I'm not sure if that's $100 USD, or $100 EUR, each.

The 6mm elements are less than $100 USD each from Bosch.

A fellow in Germany posted on a different forum that the 7mm elements were approx $45 EUR each, including shipping within Finland. That would be about $270 EUR for a set of six... plus shipping to your country. That's cheaper than I originally thought.

kynsi · #75 12-18-2007, 02:00 PM

Quote:

Originally Posted by gsxr

A fellow in Germany posted on a different forum that the 7mm elements were approx $45 EUR each, including shipping within Finland. That would be about $270 EUR for a set of six... plus shipping to your country. That's cheaper than I originally thought.

I have heard there is different kind of 7mm in markets. But fuel comes always more rapidly whith bigger element (good in high rpm) even though delivery is not extreme.