Took My Motorcar To The Dealership for an Alignment as There were no Shops willing To take on the work. Went in never a drop on the ground except AC Condensation $580 later get home and
coolant dripping on my forever dry garage floor. Called emailed service manager no response? called a week later and he pretended like he never received my email. He said they did not touch my coolant lines and there would be notes if they did. I asked why they filled up Pentosin in My ABC/Powersteering pump and that werent in his notes either . He got uncomfortable and asked I bring the car in. I did and Explained that the bottom Passenger Fitting on The Radiator that has a Square Almost Allen Key Fastener is Where the Leak is Coming From. Almost like it was drained and not tightened down. Researching I found a part
https://www.ecstuning.com/b-genuine-mercedes-benz-parts/transmission-fluid-cooler-line-sleeve-priced-each/0002770554/
that feels like the fitting that is leaking . The Service Manager Ghosted and sent his little man to Grease me , he said I need a New Radiator at the cost of $1600 . Is There Anyone Who has had similar issues or knows about this $5.50 Transmission Cooling Line Fitting? What Square Tool Tightens or how to swap out without taking the whole front end of the car off? Thanks In Advance For any Ace Out Here That Knows What it is.