|
|
|
#1
|
|||
|
|||
Part numbers on 2.6 brake booster and master cyl
I pulled these parts from a 2.6 at a junkyard today and I was wondering where the part numbers were. I can't seem to find them. Will these two parts handle the 400E brake upgrade. Thanks for your help.
__________________
George Carstens |
#2
|
|||
|
|||
NOT necessary
George,
The old 190 master cylinder and booster work just fine with the 400E upgrade. There is not enough of a displacement addition to warrant needing to change them out. I've done the conversion on my old 1984 2.2 diesel chassis and it stops on the track just fine....in fact outbrakes Vettes! Keep them for spares! Tobias MB 190/5.6 |
#3
|
|||
|
|||
The booster and the master cylinder were both bigger on the 2.6 that i pulled them off of compared to my stock 2.3 master cylinder and brake booster.
__________________
George Carstens |
Bookmarks |
|
|