Kleeman claims that you can gain 60 hp by adding one of their kompressor on a 4 cylinder engine.... So I am wondering few things:


1. Would it be possible, without to many modification, to install one on a 190E 2.5-16v engine ?

2. Are the 2.5-16v and the 2.5 SLK engine similar?

3. A Kleeman kompressor can fit very easely on a I4 SLK engine so what do you guys think?

You may want to check with Kleemann for this application. Don't think they make them for your chassis.

__________________
http://www.wheelexperts.com/gallery_reg_mb_001.html

Anything is possible! But, you'd have to build a custom intake, mounting brackets, etc. I'm not aware of any company that makes a supercharger specifically for the 16V lineup.
Jim Villers added a kompressor from an SLK to his 2.3-16V. Here's the thread:
Installing a supercharger on a 190E 2.3-16

Good luck!

__________________
87 190E EVO II Turbo

If you are serious about wanting a SC on your car, go purchase this book, it will take you threw the whole process from beginning to end.

Daniel mentioned that I installed a SLK Eaton supercharger on my 2.3-16. Tahke a look at my Pictures Page.

Of course I just blew the engine .... Check my latest thread "16V went to the track .... did not return"

__________________
Jim Villers
190SL, 230SL 5-speed, 95 E320 Wagon, 01 E320 Wagon, MGB, Boxster 'S', 190SL "Barn Find"