Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Mercedes-Benz Performance Paddock

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 06-10-2003, 06:47 PM
run.exe's Avatar
Registered User
 
Join Date: Mar 2001
Posts: 1,371
continued...

-----Original Message-----
From: Daniel Stern Lighting [mailto:dastern@vrx.net]
Sent: Tuesday, June 10, 2003 2:35 PM
To: Scott M. Shell

On Tue, 10 Jun 2003, Scott M. Shell wrote:

> Attached, please find close-up images of the headlamp portion of one of my BOSCH lenses, with the lamps off.

Good, got it.


> Do I already have phenolic connectors?

No, but you do have unacceptably thin-gauge wiring on the inside of your headlamp units. This isn't difficult to fix.


> I would prefer to run one relay per beam, to simplify my installation; hence, I prefer to use Bosch 40A relays with dual output terminals. Please include (in your kit quote) 4 Navra 130/100 bulbs.

Not a problem.


> Will your kit include detailed installation instructions for the layman?

They are here:

http://lighting.mbz.org/tech/relays/relays.html




> My 500E is, indeed, equipped with a lamp outage module

It will cry wolf upon the installation of the relays. If it works via a single light bulb on the instrument cluster, you may wish to remove this bulb. Otherwise, you'll have to have the module recalibrated to look at the relays. I don't know if this is worth the hassle and expense, but if you find that it is so, I can refer you to such a service.


> provisioning of US-spec 9004 bulb-sockets, how can I determine this?


Look for a grey or bright blue plastic 3-wire connector, about 30mm by about 25mm, and having a half-moon shape when viewed straight on, near the headlamps. It may be that these were chopped off when the European lamps were installed. If so, that will cost-reduce the relay kit.

Assuming no 9004 sockets are present: relay package = low beam + high beam + auxiliary lamps (AKA "driving lamps" or "pencil beams") = $77.00.

Narva 130/100W bulbs are $19.00 each.



> Do you require more images?

No, but you may be interested in the high-output standard-wattage bulbs we have for your reversing lamps, brake lamps, rear turn signals and, if you're running single-filament sockets in those European clear front corners, magic bulbs that appear chrome (invisible) when off, but flash legally amber...

- DS

Last edited by run.exe; 06-10-2003 at 07:20 PM.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page