|
|
|
#1
|
||||
|
||||
1982 380sl starter removal
Bad solenoid. Need to remove the starter. I see one nut, on the lower side, but I know there has to be another fastener somewhere on the other side. I have been told to look for a hex or allen bolt. But where? Any help would be greatly appreciated.
Thanks in advance.
__________________
"If we can't have fun while we're here, we might as well go to the house". 1978 300CD 1985 300TD 1999 Land Rover Discovery II rover1@sbcglobal.net |
#2
|
|||
|
|||
If you try to reach the front of the starter where the oil stick is , you can feel it . I had to bend the oil stick little bit to reach it on my 85 SL. Remember to disconnect the negative on the battery before you start your job, the power is connected directly from the battery to your starter . good luck
|
#3
|
||||
|
||||
Actually the top starter bolt goes through the tranmission bell housing into the starter. It requires going in from the back with a 17mm socket long extentions and a swivel.
|
Bookmarks |
|
|